Element of Embankment
Berm
25-02-2020
Attributes
An attribute is a particular piece of data that describes a property of an object. Each Element Type is described by a different set of attributes, although there are some attributes that are common to many Element Types.
The table below lists the attributes that are applicable to this Element Type, along with the data profile requirements for each attribute and details of when and how each should be used and delivered.
| Attribute | Format Details | Delivery | Purpose | Mandatory | geoCOBie Mapping | Updates |
|---|---|---|---|---|---|---|
| Edge LineString 1 A spatial lineString locating the exposed edge or spatial feature of an element further classified by the associated LineStringType attribute. Edge lineStrings may be singular (Edge lineString1) required in all cases, or paired (Edge lineString 1 and 2); the second may not be required indicated by 'n/a'. A lineString is a series of design or measured spatial triple points (easting, northing, elevation) each connected by a single non-crossing line, with single points at each end, that locate an element. A lineString is expressed as a JSON array of type geoJSON lineString and is further classified by the associated LineStringType attribute confirming its relative location to the element. Interim points should be spaced at a maximum of 2m for lines < 10m in length, or 10m otherwise. The default CRS is a 3D CRS to EPSG 7405 with confirmed type, European reference frame and UK OS transformation e.g. 'lineString:7405:ETRS89:OSTN15:OSGM15'. For future use; included for test purposes. | Geometry | EA3 | Component.Attribute.Name.EdgeLineString1 | 29-01-2021 | ||
| Edge LineString 2 A spatial lineString locating the landward edge or spatial feature of an element further classified by the associated LineStringType attribute. Edge lineStrings may be singular (Edge lineString1) required in all cases, or paired (Edge lineString 1 and 2); the second may not be required indicated by 'n/a'. A lineString is a series of design or measured spatial triple points (easting, northing, elevation) each connected by a single non-crossing line, with single points at each end, that locate an element. A lineString is expressed as a JSON array of type geoJSON lineString and is further classified by the associated LineStringType attribute confirming its relative location to the element. Interim points should be spaced at a maximum of 2m for lines < 10m in length, or 10m otherwise. The default CRS is a 3D CRS to EPSG 7405 with confirmed type, European reference frame and UK OS transformation e.g. 'lineString:7405:ETRS89:OSTN15:OSGM15'. For future use; included for test purposes. | Geometry | EA3 | Component.Attribute.Name.EdgeLineString2 | 29-01-2021 | ||
| element condition The condition of element at the time of inspection – Refer to Condition Assessment Manual (CAM) | Picklist 1 2 3 4 5 | EA7 | Component.Attribute.Name.ElementCondition | 25-02-2020 | ||
| element description The description of the element, if required | Text Max Length: 200 | EA3 | Component.Attribute.Name.ElementDescription | 02-06-2020 | ||
| element material The material of the element | Picklist aluminium asbestos cement bagwork blockwork brickwork clay cobbles complex concrete (piling) concrete (poured) concrete (precast) earth faggoting gabions geotextile fabric geogrids masonry mud / silt piling plastic rock sand sand / gravel shingle spiling steel / concrete steel (corrugated / Armco) steel (piling) steel / iron timber timber (hardwood) timber (softwood) timber piling other (describe) none | EA3 | Component.Attribute.Name.ElementMaterial | 25-02-2020 | ||
| element not inspected Has the element not been inspected? | Picklist Yes No | EA7 | Component.Attribute.Name.ElementNotInspected | 25-02-2020 | ||
| element not inspected reason The reason the element was not inspected | Text Max Length: 200 | EA7 | Component.Attribute.Name.ElementNotInspectedReason | 25-02-2020 | ||
| Element Ref Unique element reference code in scheme context assigned by scheme designer eg BER0123 | Text Element code BER + sequence number | EA3 | Component.Attribute.Name.ElementRef | 18-02-2021 | ||
| element revetment The surface protection material of the element | Picklist asphalt bituminised aggregate cobbles concrete (caps) concrete (granulated) concrete in situ concrete precast dolos concrete precast tetra pod concrete precast armourflex concrete precast piles concrete precast other concrete (precast) concrete cladding fabric foundry slag gabion basket gabion toe piles piles – sheet piles – timber plastic reno mattress rock armour 1 – 4 tonnes rock armour 3 – 6 tonnes rock armour 5 – 8 tonnes shingle stone (granulated) stone (unworked) stone (worked) trees turf wood other (describe) none | EA3 | Component.Attribute.Name.ElementRevetment | 29-07-2020 | ||
| element sequence The cross sectional sequence number for the element starting from the channel side. | Number Max: 19 Number of decimal places: 0 Can be negative? false | EA3 | Component.Attribute.Name.ElementSequence | 25-02-2020 | ||
| element slope The slope of the element | Number Max: 90 Number of decimal places: 0 Can be negative? false Units: degrees | EA3 | Component.Attribute.Name.ElementSlope | 02-06-2020 | ||
| element weighting The weighting of the element – Refer to Condition Assessment Manual (CAM) | Picklist 1 2 3 4 5 6 7 8 9 | EA3 | Component.Attribute.Name.ElementWeighting | 23-02-2021 | ||
| element width The horizontal width of the element | Number Max: 999.99 Number of decimal places: 2 Can be negative? false Units: metres | EA3 | Component.Attribute.Name.ElementWidth | 25-02-2020 | ||
| LineString 1 Type The type of Edge LineString 1 | Picklist Axial Crest Invert | EA3 | Component.Attribute.Name.LineString1Type | 29-01-2021 | ||
| LineString 2 Type The type of Edge LineString 2 | Picklist Axial Crest Invert | EA3 | Component.Attribute.Name.LineString2Type | 29-01-2021 | ||
| Parent Asset Ref The Asset Ref of the parent asset that this element is part of. For future use; included for test purposes. | Text Max Length: 7 | EA3 | Component.Attribute.Name.ParentAssetRef | 09-11-2020 |