Element of Wall

Sheet Piling

23-02-2021

Attributes

An attribute is a particular piece of data that describes a property of an object. Each Element Type is described by a different set of attributes, although there are some attributes that are common to many Element Types.

The table below lists the attributes that are applicable to this Element Type, along with the data profile requirements for each attribute and details of when and how each should be used and delivered.

AttributeFormat DetailsDeliveryPurposeMandatorygeoCOBie MappingUpdates
Coating Material
The coating material of the element
Picklist
Brickwork Concrete In Situ Concrete (Precast) Concrete Cladding Plastic - HDPE (High-density polyethylene) Plastic - LDPE (Low-density polyethylene) Plastic - Other (describe) Plastic - Perspex Acrylic Plastic - PVC (Polyvinyl Chloride) Rubber Timber - Hardwood Timber - Other (describe) Timber - Softwood Timber - Timber Products Other Additional Material (Describe) None
EA3Component.Attribute.Name.CoatingMaterial23-02-2021
Coating Material Description
A description of the element's coating material. Only applicable where Coating Material = Other Additional Material, Plastic - Other, or Timber - Other
Text
Max Length: 250
EA3Component.Attribute.Name.CoatingMaterialDescription23-02-2021
Edge LineString 1
A spatial lineString locating the exposed edge or spatial feature of an element further classified by the associated LineStringType attribute. Edge lineStrings may be singular (Edge lineString1) required in all cases, or paired (Edge lineString 1 and 2); the second may not be required indicated by 'n/a'. A lineString is a series of design or measured spatial triple points (easting, northing, elevation) each connected by a single non-crossing line, with single points at each end, that locate an element. A lineString is expressed as a JSON array of type geoJSON lineString and is further classified by the associated LineStringType attribute confirming its relative location to the element. Interim points should be spaced at a maximum of 2m for lines < 10m in length, or 10m otherwise. The default CRS is a 3D CRS to EPSG 7405 with confirmed type, European reference frame and UK OS transformation e.g. 'lineString:7405:ETRS89:OSTN15:OSGM15'. For future use; included for test purposes.
GeometryEA3Component.Attribute.Name.EdgeLineString123-02-2021
Edge LineString 2
A spatial lineString locating the landward edge or spatial feature of an element further classified by the associated LineStringType attribute. Edge lineStrings may be singular (Edge lineString1) required in all cases, or paired (Edge lineString 1 and 2); the second may not be required indicated by 'n/a'. A lineString is a series of design or measured spatial triple points (easting, northing, elevation) each connected by a single non-crossing line, with single points at each end, that locate an element. A lineString is expressed as a JSON array of type geoJSON lineString and is further classified by the associated LineStringType attribute confirming its relative location to the element. Interim points should be spaced at a maximum of 2m for lines < 10m in length, or 10m otherwise. The default CRS is a 3D CRS to EPSG 7405 with confirmed type, European reference frame and UK OS transformation e.g. 'lineString:7405:ETRS89:OSTN15:OSGM15'. For future use; included for test purposes.
GeometryEA3Component.Attribute.Name.EdgeLineString223-02-2021
element description
The description of the element, if required
Text
Max Length: 200
EA3Component.Attribute.Name.ElementDescription23-02-2021
Element Location
Location of element, control measure or tree(s)
Text
Max Length: 200
EA2Component.Attribute.Name.ElementLocation23-02-2021
element material
The material of the element
Picklist
Concrete - Unreinforced, Cast in-situ Concrete - Unreinforced, Precast Concrete - Reinforced, Cast in-situ Concrete - Reinforced, Precast Concrete - Other (describe) Ferrous Metal - Cast Steel Ferrous Metal - Corrugated/Armco Ferrous Metal - Iron Ferrous Metal - Mild Steel Ferrous Metal - Other (describe) Ferrous Metal - Stainless Steel Ferrous Metal - Wire Mesh Other Material (describe) Plastic - HDPE (High-density polyethylene) Plastic - LDPE (Low-density polyethylene) Plastic - Other (describe) Plastic - Perspex Acrylic Plastic - PVC (Polyvinyl Chloride) Timber - Hardwood Timber - Other (describe) Timber - Softwood Timber - Timber Products
EA3Component.Attribute.Name.ElementMaterial23-02-2021
Element Ref
Unique element reference code in scheme context assigned by scheme designer eg SPG0123
Text
Element code SPG + sequence number
EA3Component.Attribute.Name.ElementRef23-02-2021
element sequence
The cross sectional sequence number for the element starting from the channel side.
Number
Max: 19
Number of decimal places: 0
Can be negative? true
EA3Component.Attribute.Name.ElementSequence23-02-2021
element slope
The slope of the element
Number
Max: 89
Number of decimal places: 0
Can be negative? true
Units: degrees
EA3Component.Attribute.Name.ElementSlope23-02-2021
Element Type
The type of Element
Picklist
Sheet Piling
EA2Component.Attribute.Name.ElementType23-02-2021
Element Width
The width of the element
Number
Max: 1,000.00
Number of decimal places: 2
Can be negative? false
Units: metres
EA3Component.Attribute.Name.ElementWidth23-02-2021
LineString 1 Type
The type of Edge LineString 1
Picklist
Axial Crest Invert
EA3Component.Attribute.Name.LineString1Type23-02-2021
Material Description
A description of the element's material. Only applicable where Material = Concrete - Other, Ferrous Metal - Other, Masonry - Other, Non-ferrous Metal - Other, Other Material, Plastic - Other, or Timber - Other
Text
Max Length: 100
EA3Component.Attribute.Name.MaterialDescription23-02-2021
Parent Asset Ref
The Asset Ref of the parent asset that this element is part of. For future use; included for test purposes.
Text
Max Length: 7
EA3Component.Attribute.Name.ParentAssetRef23-02-2021
Request new Attribute
Back to top